High Thrust Wedges

Model 38050/30050	2" Wedge Blow-Off Force in Ounces of Thrust Distance from Target Pressure (PSIG) 40psi 60psi 80psi 100psi 6" 20 28 34 39 12" 14 22 29 35 18" 10 17 24 30 Compressed Air CFM Consumption LPM 16 453 22 623 28 794 32 906
Model 38054/30054	4" Wedge Blow-Off Force in Ounces of Thrust Distance from Target Pressure (PSIG) 40psi 60psi 80psi 100psi 6" 40 56 68 78 12" 28 44 58 70 18" 20 34 48 60 Compressed Air CFM Consumption LPM 32 906 44 1246 56 1588 64 1812
Model 38150/30150	2" Hurricane Wedge Blow-Off Force in Ounces of Thrust Distance from Target Pressure (PSIG) 40psi 60psi 80psi 100psi 6" 46 64 78 90 12" 32 51 67 81 18" 23 39 55 69 Compressed Air CFM Consumption LPM 29 820 40 1132 50 1415 58 11641
Model 38154/30154	4" Hurricane Wedge Blow-Off Force in Ounces of Thrust Distance from Target Pressure (PSIG) 40psi 60psi 80psi 100psi 6" 94 128 156 180 12" 64 102 134 162 18" 46 78 110 130 Compressed Air CFM Consumption LPM 52 1471 70 1981 90 2547 104 2943
Wedge Flow Pattern

Food Processing

• Ejecting parts from molding machines and stamping presses
• Blow-off of chips, trim scrap, swarf
• Part cleaning before painting
• Cooling extruded parts

• Food processing
• Hot corrosive environments
• Maximum durability in harsh environments

• NO SHIMS
• 25:1 Air Amplification
• Low initial and operating costs
• Highest thrust of any blow-off nozzle
• Reduce compressed air costs by 30% to 50%
• Easy to control flow/force, instant on/off
• Meets OSHA noise and dead-end pressure requirements
• No maintenance, no moving parts, no vibration
• No electricity or explosion hazard
• No RF/EMI interference
• Reduces noise levels of open air lines by 30 dBA
• Provides wide blow-off for stamping, sand blasting, drying, and parts ejection
• Manifolds available for Model 38050 in series
• Mountable on Sta-Put Hoses, Blow Guns, and Manifold.