Ionizing Bars
Ionizing Bars  With a Model 55000 Series Ionizing Bar attached to an AiRTX Air Knife, you can deliver static-neutralizing ions to a target at distances up to 20 ft.(6 m). It’s ideal for w­eb/sheet stock, conveyorized product, extrusions, or arrangement in halo shape to w­rap your product in ionized air. Quiet, maintenance-free and a miser w­ith compressed air, the knife is available in all standard knife lengths or (optionally) in custom lengths
Ionizing Air Knives
Single Point Ionizing Nozzle
Ionizing Air Gun
Power Supply

Call Us With Your Application
1-800-307-7475

Technical
Industrial
Compare
Accessories

Ionizing Bars Technical Data

Ionizing Bars are powered by a high voltage Power Supply for Maximum High Speed Static Elimination. Ionizing bars incorporate a unique inductively coupled design, which achieves powerful static neutralization with complete shockproof operation:

How Ionizing Bars Work

The power supply converts the primary (115V or 230V) electricity supply into a high voltage low amperage output. This output energy is transferred to the ionizing bar through the power cable. A capacitive coupling inside the bar reduces the energy to a level which is completely shockproof to a human but creates a large potential of ions for neutralization.

The stainless steel pins in the bar emit this energy (Corona Discharge) in the form of a field of ionized air. This ionized air corona supplies ions of both polarities. Thus it is able to neutralize static charges of positive or negative. When a statically charged object or material passes through this corona, the free moving ions are attracted to the opposite charge on the material. In this way the static electricity is neutralized. The ions are emitted up to 6" from the bar and have a life of approximately 2 seconds before they recombine with themselves or the atmosphere.

The typical AiRTX Static Elimination installation consists of one or more Ionizing Bars connected to an AiRTX Power Supply

Installing Ionizing Bars

Correct Positioning is Vital to the Efficient Operation of Static Elimination Bars. Factors to be considered are:
  1. Correct positioning relative to the problem, i.e., immediately before problem area, with no intermediary rollers or processes which could regenerate the charge.
  2. Speed of material—higher speeds require more static elimination.
  3. Conductivity and density of material. The less conductive or more dense (molecularly) the material, the more stubborn will be the charge.
  4. Grounding—vitally important to the correct operation of bars. They will not function and will become "live" if not properly grounded.
The Following Rules Should Be Observed When Installing AiRTX Ionizing Bars
  • Optimal Distance from material to be neutralized is 2" - 4"
  • Bars should be staggered if positioned on opposite sides of the material—distance between bars should not be less than the distance of either bar to surface (2" - 4")
  • Avoid proximity to grounded parts of the machine – Grounded objects will distort the corona and reduce its efficiency.
  • CAUTION: This equipment is NOT to be used in hazardous vapor areas.
Technical
Industrial
Compare
Accessories

Uses for AiRTX Ionizing Bars

Use Them For
  • Pre-paint prep areas
  • Sheet feeders, unw­inders, stackers, separators
  • Lenses, signs, etc.
  • Packaging materials
  • Pneumatic conveyors
  • Injection molded parts
  • Cutters and slitters for trim removal
  • Heat-set ink dryers, paper and textile drying equipment
  • Around guide rods and rollers on any machinery handling w­eb or sheet paper and plastic
  • Electronics assembly areas or servicing of boards and components
  • Photofinishing operations
AiRTX ionizing Bars Advantages
  • Anodized Case
  • Heavy-duty shielded power cable for long life and protection
  • Quick connect plug-in to power supply
  • Stainless Steel emitter points
  • Shockless operation
  • Static elimination 6" from bar and 20' from ionizing bar using the Airtx Air Knife
  • 6000V of Power means 20% more ions than other suppliers
  • Indicator light on Ionizing Bar to show power
  • 7500V of Power means 35% more ions than other suppliers
Technical
Industrial
Compare
Accessories
Technical
Industrial
Compare
Accessories

Model Description Unit Price Order
55003
Ionizing Bar-Effective Length: 3 in./76 mm    Overall Bar Length: 4.5 in. / 114 mm

$129.00  

+
55006
Ionizing Bar-Effective Length: 6 in./152 mm   Overall Bar Length: 7.5 in. / 191 mm

$162.00  

+
55012
Ionizing Bar-Effective Length: 12 in./305 mm Overall Bar Length: 13.5 in. / 343 mm

$199.00  

+
55018
Ionizing Bar-Effective Length: 18 in./457 mm   Overall Bar Length: 19.5 in. / 495 mm

$217.00  

+
55024
Ionizing Bar-Effective Length: 24 in./610 mm  Overall Bar Length: 25.5 in. / 648 mm

$262.00  

+
55030
Ionizing Bar-Effective Length: 30 in./762 mm Overall Bar Length: 31.5 in. / 800 mm

$278.00  

+
55036
Ionizing Bar-Effective Length: 36 in./914 mm  Overall Bar Length: 37.5 in. / 953 mm

$314.00  

+
55042
Ionizing Bar-Effective Length: 42 in./1067 mm Overall Bar Length: 43.5 in. / 1105 mm

$341.00  

+
55048
Ionizing Bar-Effective Length: 48 in./1219 mm Overall Bar Length: 49.5 in. / 1257 mm

$349.00  

+
55054
Ionizing Bar-Effective Length: 54 in./1372mm Overall Bar Length: 55.5 in. / 1409 mm

$414.00  

+
55060
Ionizing Bar-Effective Length: 60 in./1524mm Overall Bar Length: 61.5 in. / 1562 mm

$728.00  

+
55072
Ionizing Bar-Effective Length: 72 in./1828mm Overall Bar Length: 73.5 in. / 1867 mm

$814.00  

+
55084
Ionizing Bar-Effective Length: 84 in./2134mm Overall Bar Length: 85.5 in. / 2117 mm

$989.00  

+
55096
Ionizing Bar-Effective Length: 96 in./2438mm Overall Bar Length: 97.5 in. / 2476 mm

$1195.00  

+
550112
Ionizing Bar-Effective Length: 112 in./2845mm Overall Bar Length: 113.5 in. / 2883 mm

$1121.00  

+
Custom Sizes available upon request. Please call 800-307-7475
Add to cart