High Thrust Jets
High Thrust Jets 

Don't buy another compressor ...changeover to AiRTX Jets...cut noise and energy too!

Heavy blow-off and air conveying jobs can overwork your compressor and shorten the time between expensive overhauls. A 1/4" (6mm) air tube uses the entire output of a 10-hp compressor, sending energy costs out of sight, hitting 100 dBA noise levels, and violating OSHA dead-end air pressure limits. Air Saver Jets give you an edge with air amplification. Safer and quieter, they amplify compressed air flow four times, delivering high thrust with a fraction of the air used by open air lines. Plant-wide changeover to AiRTX Jets is like adding compressor capacity. They'll:
  • cut your energy bill
  • increase air flow with lower noise level
  • reduce demand on your compressor
  • give you a return on investment in weeks, if not days.
Air Saver Nozzles
Wedges

Call Us With Your Application
1-800-307-7475

Need Extended Reach? Customize your nozzle with: Sta-Put Hoses | Blow Guns | Manifolds

Technical
Industrial
Compare
Accessories

High Thrust Jets Technical Data

Air Saver High-Thrust Jets release a tiny amount of compressed air at near-sonic velocity through a fine, internal, ring-shaped nozzle. The high-speed "tube" of air ejected through the front creates a strong vacuum behind itself, pulling additional surrounding air through the rear of the jet, while pushing the ambient air in front

Don't buy another compressor ...changeover to AiRTX Jets...cut noise and energy too!

Heavy blow-off and air conveying jobs can overwork your compressor and shorten the time between expensive overhauls. A 1/4" (6mm) air tube uses the entire output of a 10-hp compressor, sending energy costs out of sight, hitting 100 dBA noise levels, and violating OSHA dead-end air pressure limits. Air Saver Jets give you an edge with air amplification. Safer and quieter, they amplify compressed air flow four times, delivering high thrust with a fraction of the air used by open air lines. Plant-wide changeover to AiRTX Jets is like adding compressor capacity. They'll:
  • cut your energy bill
  • increase air flow with lower noise level
  • reduce demand on your compressor
  • give you a return on investment in weeks, if not days.

Three models: adjustable unit for easy set-up, with air conveying capability

Our Adjustable High-Thrust Jet simplifies set-up or system change because you can alter the flow and thrust with a quick twist of the nozzle. Just install it on your air line and set it to do the job. The In-Line Air Jet is ideal for retrofitting open air line blowoff applications where system set-up does not change frequently. It can also air convey fine granular product, with a 3/4" (19mm) diameter inlet for attachment of tubing. It develops 54" W.C. suction and 5.6 oz. (150 gm) thrust with 80 PSIG (5 BAR) air.

High Thrust Jets

Model 38038E


Model 38038


Model 38044


Flowpattern


Jet Blow-Off Force in Ounces of Thrust
Distance from Target Pressure (PSIG)
40psi 60psi 80psi 100psi
6" 7.5 11.8 16.5 22.2
12" 6.9 11.5 16.2 21.4
18" 5.6 9.3 13.7 17.4

High Thrust Jet is preset at 15 cfm @80 psi Ounces x 25.35 =Grams
Technical
Industrial
Compare
Accessories

Industrial Solutions for High Thrust Jets


Fume Removal





A low cost, maintenance free AiRTX Jet system uses only 3 cfm (85 lpm) of compressed air to remove hazardous fumes from this solvent storage cabinet, The air flow amplification of High Thrust Jet Model 38044 provides the needed ventilation without dangerous fan blades or expensive electric motors.

Metalworking





This milling operation is enhanced by the chip removal and cooling provided by the Model 38038E Adjustable High Thrust Jet. The Adjustable Jet provides plenty of thrust to prevent build-up of metal chips and coolant around the tool.

Uses for AiRTX High Thrust Jets

Use Them For
  • Ejecting parts from molding machines and stamping presses
  • Blow-off of chips, trim scrap and swarf
  • Air conveying dusts, powders and fibers
  • Part cleaning before painting
  • Cooling extruded parts
  • Cleaning/cooling of metal strip and plastic/paper webs
  • Cleaning/cooling of conveyors and conveyorized parts
AiRTX High Thrust Jets Advantages
  • Low initial and operating costs
  • Meet OSHA noise and dead-end pressure requirements
  • Easy to control flow/force
  • Instant on/off, no vibration
  • No maintenance, no moving parts
  • No electricity or explosion hazard
  • No RF/EMI interference
  • Adjustable flow/force
  • Solid brass construction
  • Model 38038 dead-ended suction @80 psi, 18 cfm is 189" water column
The Hurricane Line of Nozzles provide the benefits of the AiRTX Nozzles but have greater thrust when power is needed for moving heavy objects, removing large amounts of liquids from parts in a short time, and larger air flows for quicker drying.
Technical
Industrial
Compare
Accessories
Nozzle Model Material Air Inlet Fixed Flow
Adjustable
Description Air Consump
40psi
Air Consump
80psi
Air Flow Amp
40psi
Air Flow Amp
80psi
Ozs of Thrust
40psi
Ozs of Thrust
80psi
38035 Brass 1/8 NPTF Adjustable Adjustable High Thrust Jet 6cfm 15cfm 24cfm 60cfm 7.5 16.5
38038E Brass 1/8 NPTM Adjustable Adjustable High Thrust Jet 6cfm 15cfm 24cfm 60cfm 7.5 16.5
38033 Brass 1/8 NPTM Adjustable Adjustable In-Line High Thrust Jet 6cfm 15cfm 24cfm 60cfm 7.5 16.5
38050-1 Aluminum 1/4 NPTF Adjustable Adjustable 2" High Thrust Wedge Jet 16cfm 28cfm 400cfm 70cfm 20 34
38054-1 Aluminum 1/4 NPTF Adjustable Adjustable 4" High Thrust Wedge Jet 32cfm 56cfm 800 cfm 1400cfm 40 68
40009 Stainless 1/8 NPTM Adjustable Adjustable Air Saver Nozzle 10cfm 15cfm 250cfm 375cfm 7.7 16.5
48004 Aluminum 1/8 NPTM Adjustable Adjustable Flare Nozzle 10cfm 15cfm 250cfm 375cfm 7.7 16.5
48009 Aluminum 1/8 NPTM Adjustable Adjustable Air Saver Nozzle 10cfm 15cfm 250cfm 375cfm 7.7 16.5
48109 Aluminum 1/2 NPTM Adjustable Hurricane Adjustable Air Saver Nozzle 10cfm 15cfm 800cfm 1400cfm 14 30
30050 Stainless 1/4 NPTM Fixed Flow 2" Wedge 16cfm 28cfm 400cfm 700cfm 20 34
30054 Stainless 1/4 NPTM Fixed Flow 4" Wedge 32cfm 56cfm 800cfm 1400cfm 40 68
30150 Stainless 1/4 NPTM Fixed Flow 2" Wedge 29cfm 50cfm 725cfm 1250cfm 46 78
30154 Stainless 1/4 NPTM Fixed Flow 4" Hurricane Wedge 58cfm 100cfm 1450cfm 2500cfm 92 156
38050 Aluminum 1/4 NPTM Fixed Flow 2" High Thrust Wedge 16cfm 28cfm 400cfm 700cfm 20 34
38054 Aluminum 1/4 NPTM Fixed Flow 4" Wedge 32cfm 56cfm 800cfm 1400cfm 40 68
38150 Aluminum 1/4 NPTM Fixed Flow 2" Hurricane Wedge 29cfm 50cfm 725cfm 1250cfm 46 78
38154 Aluminum 1/4 NPTM Fixed Flow 4" Hurricane Wedge 58cfm 100cfm 1450cfm 2500cfm 92 156
40005 Stainless 1/4 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 22cfm 30cfm 550cfm 750cfm 24 45
40007 Stainless 1/4 NPTF Fixed Flow Air Saver Force Nozzle 9cfm 15cfm 2225cfm 375cfm 9 21
40008 Stainless 1/8 NPTM Fixed Flow Fixed Flow Air Saver Nozzle 6cfm 9cfm 150cfm 225cfm 4.5 9
40107 Stainless 1/2 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 15cfm 32cfm 375cfm 800cfm 16 34
48005 Aluminum 1/4 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 22cfm 30cfm 550cfm 750cfm 24 45
48006 Brass/Rubber 1/8 NPTM Fixed Flow Rubber Tip Nozzle 6cfm 9cfm 150cfm 225cfm 4.5 8
48007 Aluminum 1/4 NPTF Fixed Flow Air Saver Force Nozzle 9cfm 15cfm 2225cfm 375cfm 9 21
48008 Brass 1/8 NPTM Fixed Flow Air Saver Nozzle 6cfm 9cfm 150cfm 225cfm 4.5 9
48010 Brass Fixed Flow Barbed Air Saver Nozzle 6cfm 9cfm 150cfm 225cfm 4.5 9
48107 Aluminum 1/2 NPTF Fixed Flow Hurricane Air Saver Force Nozzle 15cfm 32cfm 375cfm 800cfm 16 34
Technical
Industrial
Compare
Accessories

Model Description Unit Price Order
38038
Adjustable High-Thrust Jet 1/8" NPTF Air Inlet

$63.00  

+
38038E
Adjustable High-Thrust Jet 1/8" NPTM Air Inlet

$63.00  

+
38044
Adjustable In-Line High-Thrust Jet 1/8" NPTF Air Inlet

$68.00  

+
Add to cart